How To Ensure Physical Termite Control When Fixing Hardwood Floors
Termites are usually useful for nutrient cycles and also bring major loses in wood structures among many other valuables. Most people with hardwood floors complain about termite attack to their floors than those with concrete floors and tiled floors. When a hardwood floor is fixed properly, during fresh construction or when refinishing, it is highly unlikely that you will need termite control services later on. This article will help you prevent risks of damage to your hardwood floors by termites.
The top step in refinishing hardwood floors involves observing the floor and paying more attention to the gaps between the floor planks. Observing between the space can help you identify any signs for termite control. Termite control will be necessary if you observe any signs of termites. While observing, you will be able to tell the kind of floor you are working on. Different kinds of wood pose different levels of difficulty in refinishing. If you have the assurance that you can begin the reconstruction process, you can then go on.
The next important termite control procedure in refinishing hardwood floors is conducting an adhesion test. Begin by selecting a small area where you will carry out the adhesion test. You must first cleanse thoroughly the floor you are working on using a floor cleaner. After cleansing the termite control area, sand it with a sanding screen and wipe off the extra residue. Then follows the application of polyurethane coat on the dust-free surface. You should wait for about twenty-four hours to elapse before checking on the area. The area should be smooth apart from a few whiskers caused by dust. You can then press down on the surface using medium and even pressure to confirm that the solution will adhere properly.
After the above step, bring together the materials that are essential for termite control your floors. The most of the materials that are necessary are inclusive of the hammer, nail set, pliers, edge sander, box fan, power floor buffer, polyurethane floor sealant, work gloves, hearing protection, breathing protection, industrial grade vacuum cleaner and painter’s tape. Ask your neighbor if you can termite control the above items from them and if they do not have them, buy from an online seller or from a home improvement store near you.
After gathering the materials, clean the floor, carry out buffering and then do the finish. Cleaning helps the floor to come out flawless. Bear in mind while buffing that the sanding screen only lasts at most fifteen minutes before it loses its sanding ability. After buffering the floor, you should ensure that you get rid of any dust prior to doing the finish. The easiest floor finish option to use is polyurethane.